Guide to MsPro v3
I. Introduction
II. Terms
III. Starting off MSPro
- Getting MSPro
- System configurations
IV. MSPro Settings
- Explanation of layout
- Specific keys
V. Testing MSPro
- Using outside Maplestory
- Using inside Maplestory
VI. Botting
- Types of botting
-Techniques of botting
- Tips on botting
VII. To-dos and Not-to-dos
VIII. FAQ
I. Introduction
MSPro v3 is the third version of MSPro, which is created by Opcode&H90 to exist to stretch the boundaries of what a game can do, and to change the rules of a game. That is called hacking, and one category under it, would be botting. MSPro v3 is a bot, it uses special codes to confuse and get past protection systems such as the GameGuard, and uses functions to do what the user desires inside the program. MSPro uses specific functions set by the maker.
II. Terms.
- Bot: Means to use a program to do what a user can actually do on his computer but is either too time consuming, therefore uses the program to do it for him, or to speed up the process of what he is doing.
- Function: A certain piece of code inside a program that executes a specified move when the user activates it
III. Starting off MSPro v3
Getting MSPro
Download MSPro v3 from MPC Forums here.
System configuration
Before you unzip the program, make sure you have the latest service pack for any Windows OS. Unzip the program, and run MSPro.exe. You should see a window pop up on the top right hand corner of the screen.
You should see this:
When you bring your mouse over it, the window would enlarge itself, showing a few options below:
Throughout, the status should be shown as Idle.
IV. MSPro Settings
Explanation of layout
Now that you got your MSPro ready, you have to configure it. In the first column of keys are your activation keys, or keys that is used to activate the specific bot in maplestory. Those keys are circled in red:
As you can see, the first bot is Auto-Clicker. The key I set for my MSPro is F12, as highlighted. It means that inside the game, when I press F12, the autoclick would start. Pressing F12 again would stop the Auto-Clicker.
You can select the keys by pressing on the drop down menu of each key and selecting your desired keys
As you would have noticed, there is a second set of keys beside the first set, as shown in red:
That is the usage key. That key would be what the function (or bot) would press inside the game. For example, the third function, Auto-Loot, I set F9 as the activation key, which means that when i press F9 inside the game, the Auto-Loot Function would start. The second key for the function,for me, i set as Z. Which means, inside the game, when I start the Auto-Loot, it would keep pressing Z.
A third part to the MSPro is the HP/MP slider bar, as indicated:
The first slider bar is the indicator for the HP amount. For me, i set the HP alarm as 40% as seen beside the slider bar. That would mean, that if I turn on HP autopot by pressing F11, the autopot for HP would wait till my HP is below 40% (which means, if my total HP is 100, it would press my pot key when my HP drops below 40). Since I set my HP pot key to be H, it means that the program, when turned on by pressing F11, would press H to pot when my HP falls below 40.
Same thing goes for MP. When MP falls below 30% for me, it would press the MP pot button.
You can set 2 or more functions to be activated by the same hotkey, for example, my HP and MP pot key are activated together. However, it is not advisable to set other functions to be activated by the same key.
Please take note, the keys above can be set before and after MapleStory is set up, but the options below HAVE to be set before Maple starts.
Specific Keys
Auto-click
When you turn on auto-click, the computer just clicks. Nothing to explain
Auto-Chat
When you turn on auto chat, the program will type out messages every 1 second for you. Best used as a auto-tracker for PQ. It works by pressing down and enter. Therefore, to repeat a message, lets say message is a. Type "a" and enter. when you turn on autochat it keeps chatting "a". Then, type "a", enter, then "b", enter. Turning on autochat makes you chat a,b,a,b. When you type "a" enter, "b", enter, and "c", enter, by turning on autochat, you get a,b,c,a,b,c,a,b,c. Simple enough
Auto-Loot
Presses any key you specify as the loot key to loot. Works for all keys but maybe not for the INSERT key.
HP auto-Potion
presses the HP key that you define when your HP is below the specified percentage, until it is above the specified percentage
MP auto-pot
same as HP auto-pot
Beep notify
If you have noticed, there is a check box below the keys, one of which selects beep notify. When beep notify is turned on, whenever you turn on a function, such as Auto-Loot, it would make a sound that increases in pitch to tell you it is turned on. When turning off a function, it would make a sound that decreases in pitch. When autopotting, there would also be a sound made whenever auto pot drinks a pot for you.
Windowed Mode
Self explanatory, windowed mode puts maplestory in a window. However, it is easily detected by gameguard, i would instead recommend you to download Dxwnd instead. You can download it here, or you can search google for a better one.
Focus check
This is a very important function. When you have focus check on, it would turn off all functions (e.g auto-click) when Maplestory is not the active window, meaning that if you alt-tab away, autoclick and other functions will turn off until you alt-tab back to Maple.
Testing MSPro v3
Testing MSPro
To start using MSPro on your own computer, the most essential thing many people forget is to turn on MSPro first, then turn on Maple!. If not, MSPro cannot hook and cannot work!
Testing MSPro on the outside
Turn off focus check, save, then turn on Maple. You should see hooked, then connection initialized, then Ready! Enjoy!. After that, alt tab away from Maple, and test.
The first thing to test is the auto-click.
Open up the testpad file inside the MSPro folder, and you will see a small window pop up. Hover over the Test pad, and turn on Auto-Click. You should see the click rate jump up. Once its tested, turn Autoclick off, and turn off test pad. Then, open a notepad file, and turn on autoloot. You should see letters coming out if your autoloot is turned on. Same goes for Autochat. you should see the computer pressing enter keys every 1 sec.
Testing MSPro on the inside
Turn on autoclick and leave it on the inventory button. You should hear a very irritating noise. Turn on auto loot, and drop an item. it should immediately be picked up. Turn on Autochat, and you will keep chatting (refer to Specific Keys section on how to use auto chat)
Autopot works only for certain computers with correct debuggers. If it does work, when HP and MP is low, you should be auto potting.
Botting
Now to to exciting bit!
Different types of botting.
Currently, there are potion botting, loot botting, speech botting and train bot. Each type is rather self explanatory, but i will describe them anyway.
Potion botting enables you to keep alive even in the worst of situations. You would think you will die at Alishar at level 35 although you got hundreds of pots since you cannot drink pots fast enough, or since he does 700 damage and you have only 800 health. Potion botting allows you to keep alive still, since it continuously spam potions till you are above a safe level that you define for it. The best, you can afk at someplace you think is safe, but someone knocks you off, and it will keep you alive even in midst of monsters
Speech botting is where in the FM, you need to keep repeating a message. For example, i want to sell a glove for attack 60% for 1000 mesos. so I type in that message and press enter. We shall call that -a-. You then type in the same message, but with a different letter somewhere, for example, -a- would have no full stop at the end, so you press up after entering the first message and put a full stop there. Then you enter. The message is repeated with a fullstop at the end. Lets call that -b-. When you press up twice, you go back to -a-. Enter again. so your message is now -a-, -b-, -a-. Then turn on auto-speech, and it continues -b-,-a-,-b-,-a- once per second, till you stop it. you can also do -a-,-b-,-c- too.
Train bot is probably what most people need. You will use the bot to train on monsters on its own while you go do something else less boring.
There are different techniques of botting, essentially, the most popular but inefficient would be to set MSPro auto loot button to your attack button, for example, in game, i press C to do lightning, therefore, i set MSPro to keep sending C. That is how you keep attacking non stop. The downside is, when you use autoloot on a skill instead, you cannot autoloot the loot that drops.
However, where many people do not realise, is that autoclicker plays a part too. The skill tree where you add your new skills everytime you level, the skills can be activated by clicking on it. Therefore, when you autoclick the skill, you willl attack. Whats more, you can auto loot too. The bad thing is, you cannot navigate your mouse away from the skill, nor alt-tab without turning it off.
Tips on train botting
1) NEVER afk bot unless you are really confident that no one will spot you or you are offmap.
2) Make your chat (the chat when you press enter to speak) to guild or to buddy. that would mean that when you accidentally speak, you will speak to the guild or buddies instead, so if someone comes and you accidentally press a wrong button that sends a message, the message would not be sent out, then you can safely run away without the person knowing who you are.
3) Keep watching. you might never know someone might just pop out of no where and see you.
To do and Not to dos
You should not use windowed mode, instead, use Dxwnd.
Turn on focus check. It helps if you accidentally alt-tab or got a popup.
Dont leave auto HP/MP above 80%, usually, it will waste your MP/HP pots by drinking whenever your health or mana is below 80%
FAQ
Q:I can't get my auto pot to work!
A:Get Dxwnd, try in windowed mode. If it doesnt work, download MSVBVM60.dll for Visual Basic. If it still does not work, means that your OS does not have the right driver files for MSPro. That, i cannot help.
Q:My MSPro does not attach! It always show Idle when Maple is on!
A: Check if you turned on MS before you turned on MSPro. Be sure MSPro is properly started up and Idle before you turn on Maple. Maple must also be set to Windows XP compatibility.
Q:How do I turn off the sound?
A: If its the sound of activation of skills, just quit Maple, turn off beep notify, and turn on Maple again. If its the sound of autopotting, unplug your sound card from your PC. (Laptops, just turn off the speakers)